This anchor chain adds another important accessory to your model. The anchor chain model is printed in one piece, so it is fully functional after printing. The limits of its usability are naturally determined by the scale and especially the material used.


 The chain is designed so that you can place multiple chain lengths inside each other to print them connected together.


 Choose the scale of the model yourself. The model is designed in our familiar sizes, so you can scale it to fit your own model. A shackle at the end allows the chain to be attached to an anchor, for example.
 Preferably use a resin printer. On a larger scale, the chain can also be printed using FDM.


 The model


 We've prepared the chain for you in several lengths. We've also attached a shackle to one end, which you can close with a wire (you'll need to provide this yourself). The following lengths are included:


 - 20 links
 - 45 links
 - 70 links
 - 95 links
 - 120 links
 - 145 links
 - 170 links
 - 195 links


 For longer lengths, you can slide the individual lengths together in the slicer to create additional lengths. The chain is compatible with our Hingley Hall anchor.




 Our advantages



 
 This model is not designed for any specific scale. However, please note that the level of detail varies with increasing scale. The smaller your model, the more details are lost and/or the more difficult it becomes to print.
 
 Unlimited copies - Buy the product once and use it for your entire fleet within the household.
 
 You always have spare parts on hand and even after years of operation you don't have to spend time searching for defective parts.
 
 The limits of printing are determined by your 3D printer. The build volume of your printer defines the maximum possible scale.



 Do you have any further questions? Don't hesitate to contact us.